« Older Entries

New Yorker Electronics to distribute Gowanda Ceramic Wirewound Chip Inductor Series

NORTHVALE, New Jersey, USA – New Yorker Electronics has announced its distribution of the new Gowanda Electronics’ four Ceramic Wirewound Chip Inductor series with no internal solder connections, increases reliability in Space/Aero programs. The Gowanda inductors are also Military QPL-approved, built & tested to meet M83446.

Part of Gowanda’s H-Core Solution, these chip inductors are designed to offer a solution to those facing challenges with their traditional molded inductors. In addition to the no internal solder connections, its winding are fully protected by UV, coil forms readily available and they are made in USA with fully automated assembly. They also possess co-fired terminations and fully encapsulated designs are available for extra durability.

Excellent for high frequency applications, at only 1.20mm x 0.065mm x 0.70mm, the CC0402 is less than 0.05g and is suitable for reflow soldering. Its capacitance options range from 10nH to 4700nH with DC currency ratings from 220mA to 1000mA and a tolerance of 2%. It has an operating temperature range of -55°C to +125°C and like all four series it has a flat top cover for ‘pick and place’ and is suitable for reflow soldering.

The CC0603 is available in three tolerance options of 10%, 5% and 2%. It ranges in capacitance options from 1.8nH to 330nH and DC currency ratings from 179mA to 1000mA. It is 1.80mm x 1.12mm x 1.02mm and weighs less than 0.05g. Its operating temp ranges from -40°C to +125°C.

The CC0805 has a capacitance range of 2.4 to 2200nH and a DC currency range of 140 to 1000mA with an operating range of -55°C to +125°C. It is 2.41mm x 1.78mm x 1.52mm with available tolerance options of 10%, 5% and 2%.

The CC1008 is 2.92mm x 2.80mm x 2.28mm and has an operating temperature of -40°C to +125°C. It ranges in capacitance from 10nH to 4700nH and in DC currency from 220mA to 1000mA. It offers tolerances of 5% and 2%.

All four series ensure low power consumption, high chemical resistance, vibration/shear resistance, electrical and mechanical integrity and durability during handling. Gowanda also makes implantable device components (human body).

Features & Benefits:

No internal solder connections, increases reliability
Coil forms readily available
Windings are fully protected by UV
Made in USA with fully automated assembly
Higher Q; SRF performance is 2-3X better
Higher current ratings (lower power consumption)
Applications:

Industrial Automation & Control Equipment
Instrumentation
Medical & Diagnostic Equipment/Devices
Test & Measurement Equipment
New Yorker Electronics distributes Gowanda products and is franchise distributor for Gowanda Component Group’s RCD Components.

Tags:

Acupressure Treatment Can Help Activate Body’s Healing Power

Acupressure is a painless treatment which make use of manual pressure, usually with fingertips to the specific points on body. In case you are tired of visiting a doctor and taking heavy medicines, this ancient method would help you in getting much-needed comfort and relaxation. A session typically lasts about an hour. You might need several such sessions for getting the best results.

There are specific body points wherein the accupresure experts use their fingers, palms, elbows or feet, or special devices, these points are called acupoints. Acting on these points will help you manage variety of symptoms related to:

Cancer and other forms of fatigue
Headache
Muscle pain
Insomnia
Stress
Bone weakness and cramps
Nausea and vomiting during pregnancy or after surgery
The goal of acupressure therapy is to restore health and balance to the body’s channels of energy and to regulate opposing forces of negative and positive energy. It also involves stretching or acupressure massage, as well as other methods. As per the report published in CA: A Cancer Journal for Clinicians, acupressure may help ease nausea and vomiting in those with chemotherapy-induced nausea and vomiting. Some studies suggest that acupressure releases endorphins and promotes anti-inflammatory effects, helping with certain types of arthritis. Some studies even suggest that fatigue and mood may improve from the use of acupressure.

After an acupressure session, you may feel soreness at acupressure points. You may also feel temporarily lightheaded, immediately bring this to the notice of your therapist.

Remember, there are certain precautions that needed to be taken especially if you have cancer, arthritis, heart disease, or a chronic condition and even during pregnancy, acupressure typically isn’t done on the abdomen or certain points on the leg or lower back.

Let’s understand the specific body points:

Point CV12

Location: midway between the belly button and therefore the bottom of the sternum. On the midplane of the abdomen, five finger breadth on top of the belly button.

Benefits: acute abdominal pain, pain thanks to deadly sin, stomachic pain, bitter abdomen, belching, regurgitation, vomiting, diarrhea, dysentery, distention of the abdomen thanks to flatulence, herniation.

Point ST37

Location: eight finger breadth (6 body inch) below the lateral eye of the patella, on the road connecting the attention of the patella and therefore the external malleolus.

Benefits: abdominal bloating, severe constipation, diarrhoea, dysentery, inflammation, cramps within the lower abdomen, knee pain, colitis, irritable bowels.

Point LV3

Location: within the depression distal to the junction of the first and second metatarsal bones.

Benefits: reconciliation purpose, low energy, high blood pressure, female internal reproductive organ injury, PMS, retention of excreta, abdominal distention, fever, diarrhoea, headache, chemical toxicity, anger, epilepsy, injury from the abdomen, injury from the eyes, mouth, mucous secretion membrane, stroke, infantile convulsion, poor circulation.

Point LV5

Location: seven finger breadth on top of the tip of the medial malleolus on the medial border of shinbone.

Benefits: chemical and environmental toxicity, chronic fatigue syndrome, immune deficiency disorders, irregular expelling, PMS, fibromyalgia, dysuria, low energy, retention of excreta, aspect effects of radiation and therapy in cancer patients.

Point K10

Location: once the knee is flexed, the purpose is on the medial aspect of the ginglymus fossa, between the tendons of m. Semitendinosus and semimembranosus, level with UB forty.

Benefits: impotence, hernia, female internal reproductive organ injury, pain within the knee, mental disorders, and hair loss.

While it’s best to consult an acupuncturist for following the proper instructions, this treatment process could also be taken at home that is, it could also be self-administered. You do not need to necessarily use all of the points, using just one or two of them could be effective. Pressure should be gentle over fragile and sensitive areas such as face.

Acupressure treatment could be beneficial for those trying to get relief from natural methods rather than relying on medications. Whatever the situation, always seek the guidance of your physician before opting for these kinds of processes.

Tags:

Learn What Venture Capital Can Do For You

The process of an investor buying part of a company, usually one just starting up, is called venture capital. These people put their money in a high risk company which should also have high growth. These types of investments are generally anywhere from five to seven years long. The investor will look for a return on their money by the company being sold or from offering to sell to the public shares in the company.

When a venture capitalist does invest in a company, they might want a percentage of the company’s equity, and might want to also have a position on the board of directors. All investors who put venture capital in a company are looking for some sort of good return on their investment. They can say that they want repayment from the sale of the company itself, ask for their money back or renegotiate the original deal.

You’ll also find that there are three different kinds of venture capital investment. The first is early stage financing, which has first stage financing, start-up financing and seed financing. First stage finance is for companies who want to expand their capital to continue with a full scale and to enter the arena of public business. Seed financing is a small portion of venture capital, given to someone who is trying to begin a business, such as an entrepreneur. This can be used for various things such as developing a business plan, market research or to build up their management team. Start-up financing is when the venture capital which is given to a business that has been around for under a year. Their product won’t have gone commercial yet but they will just be starting to do this.

Next you’ll find expansion financing. It includes second and third stage financing plus bridge financing. Second stage is an investment that’s meant to expand a company which is already stable. It will have growing accounts and inventories plus be trading already, but it is possibly not making a profit yet. Third stage financing is for companies which are becoming profitable or are breaking even. The venture capital here is used to expand the business and the money could be used for to buy real estate or more product development. Bridge financing has several different meanings. It is an interest only, short term investment that can be used for restructuring a company. It can also be used to liquidate an investor’s position and sell their stock.

In acquisition financing the investing will be used to get a percentage or even a whole of a different company. The venture capital here is also used by a management group when they are buying out a line of products or a business, no matter the stage of their development. It can be a public company or a private company.

Tags: